Air conditioning Midea All Easy PRO...
Air conditioning Midea All Easy PRO...
Air conditioning Midea All Easy PRO...

Air conditioning Midea All Easy PRO NORDIC 24000 BTU, A +++, WiFi, cooling / heating

2140008
Out of stock - Under replenishment
lei5,659.00
Tax included

Technical specifications:

Model: Midea All Easy PRO NORDIC 24000 BTU

Coolant: R32

Coverage area: 32-47 m 2

Cooling energy efficiency: A +++

Heating energy efficiency: A ++

Capacity: 24000 BTU - cooling; 25000 BTU - heating

Minimum cooling temperature (o C): -15 o

Maximum heating temperature (o C): 24 o

Supply voltage: 230V

Consumption: 1760W cooling; 1975W heating

Indoor unit size (mm): 1140 x 370 x 275 mm (W x H x H)

Outdoor unit size (mm): 890 x 342 x 673 mm (W x H x H)

 

Nordic Climate Performance

XtremeEngineTM operates at maximum heating capacity even when the outside ambient temperature reaches -20oC. Keep the warmth of your home, no matter how harsh the weather outside.

  • long frequency range: 12 - 120 Hz
  • highest exhaust air temperature: 50oC
  • defrost rate: 100% defrost during low frequency operation, in 72 hours (indoor temperature: 10oC;
  • outdoor temperature: -10oC)
  • the exhaust air temperature reaches 35oC in 60 seconds

winter-landscape.jpg

23grd.jpg

Cool at Maximum Speed

Quickly cool every corner of the room for your comfort. The front positioning of the electrical box and the design of the electronic board free up more space for the exhaust grille, so All Easy Pro has improved cooling performance, with much lower monthly energy consumption.

Comfort

The minimalist design of the exhaust grille allows All Easy Pro devices to ensure perfect comfort in any room. The desired temperature is reached in the shortest time, with minimal fluctuations in the noise level, both in Silence mode and when the Boost button is pressed.

a-plus3.jpg

POWER SAVING

interior-aparat.jpg

Minimalist Structure, Minimum Invoice

Thanks to the electric box located on the front and the design of the electronic board, which frees up more space for air intake and exhaust, All Easy Pro has additional power, for superior cooling performance, but lower electricity bills.

a-plus3-badge.jpg

Magnifying Energy Bill - 1W Stand-by

The innovative construction of the All Easy Pro is completed by the low power consumption in standby mode, when the device only needs about 1W. This further contributes to energy savings.

energie.jpg

Exactly the Power You Need - GEAR Function

All Easy Pro offers three operating options, at three levels of power consumption: 50%, 75% and 100%. When it is already cool enough, you can choose a lower level of energy consumption.

100-percent.jpg

HEALTH - Clean Air Easily Obtained

Lifting for Cleaning

You no longer have to worry about opening the front panel. Clean the filter whenever you want, because it is very easy. 6 round magnetic connectors, located on the filter frame, make it easy to remove for sanitation. Then, with a gentle click, you have finished reassembling the clean filter.

curatenie.jpg

Screw, 1 Minute for Deep Cleaning

Thanks to the innovative design, fixing with 1 screw, it takes only 1 minute to disassemble the fan of the indoor unit, for sanitation. Thus, you save time and reduce the expenses for the services of qualified technicians.

one-minute.jpg

The Clean Air Experience

All Easy Pro ensures that you breathe clean, fresh and healthy air every time. The Double Filtration System thoroughly removes harmful substances in two successive steps: preliminary filtration (high density filter), followed by micro-filtration (additional HEPA and Compound filters), and Active Clean technology cleans dust, mold and grease that adhere to heat exchanger and which can generate unpleasant odors.

leaves.jpg

REMOVAL, AT 1 SCREW DISTANCE

surub-distanta.jpg

REMOVAL, AT 1 SCREW DISTANCE

inlocuire-placa-electronica.jpg

FAN ENGINE ASSEMBLY

montarea-motorului.jpg

WE INVENTED THE MINIMALISTIC STRUCTURE THAT WILL REDUCE WORKING TIME

structura-minimalista.jpg

Easy wiring in 3 minutes

Generous space, 176 mm, for the refrigeration route, with support rod.

Electric box located in front, for convenient access for wiring, by opening the front panel.

176mm.jpgconexiuni.jpg

Easy Measurement and Fixing, without other Tools

The super-thin mounting plate has an integrated grid ruler and horizontal level.

Measure, mark and fix without other tools, only with the mounting plate.

suport1.jpg

STEP 1: Mark POINT A according to the instructions on the graduated board.

suport2.jpg

STEP 2: Lower the plate until the mounting hole reaches point A.

suport3.jpg

STEP 3: Locate the mounting hole on the other side using the integrated level for precise alignment.

instalare-impecabila.jpg

No reviews

7 other products in the same category:

Product added to wishlist
Product added to compare.