Magnum anti-freeze putty for gutters and downspouts, cable with plug and thermostat, various sizes
Defrost cable with constant power 30 W/ml, ready to use, with thermostat set to start at 5 ° C and stop at 15 ° C, 2 meters of cold cable and plug.
Specifications:
Nominal voltage: 230V
Output: 30W/m
Outer diameter: 7mm
Resistance - Chrome/Nickel
Insulation: XLPE
Connection cable: 2m
The defrosting system with built-in thermostat and plug, for gutters and downspouts, is installed with the aim of preventing the deposition of snow and ice inside the gutters, the bursting of downspouts due to the ice plugs formed inside them, the damage to the facades of houses and the formation of roofs, the breaking gutters, water seepage from the gutter, under the roof.
Accidents caused by falling snow, ice and slush on sidewalks and cars are avoided. In general, at the moment when the defrosting system for the gutters is made, the downspouts that collect the rainwater runoff from them are also protected.
All the problems listed above can be avoided very easily by installing the Defrosting Kit with built-in thermostat and power plug, ready for use.
The defrosting kit has ultraviolet protection, increased mechanical resistance, resistance to temperature cycles (freeze-thaw). Practically, once installed, these defrosting cables do not need to be removed.
The supply voltage of the defrosting kit is 230V. The defrosting kit is mounted inside the gutter and downspout ´´ round trip ´´. Fastening can be done with the help of special plastic clips, metal flatbands with clamping spaces, self-adhesive aluminum strips or bitumen adhesive strips with aluminum.
The installation of the defrosting kit is done along the entire length of the gutter and along the entire length of the downspout.